|
 |
|
| |
|
|
|
|
|
|
The
chlorinated powder free gloves with negligible level of residue
powder (i.e., < 2mg/glove) is available from Asia Pacific
Latex Sdn. Bhd.
The
powder free gloves are being produced by extensive washing and
treating with chlorination process. With this process tackiness
of gloves can be avoided upon powder removal and it also can
eliminates most of the extractable latex protein.
Range
of medical grade powder free gloves produced by Asia Pacific
Latex
Sdn. Bhd. are in accordance to established standards
which include ASTM and other similar organization in Europe,
Australia and
New Zealand.
|
|
|
|
We
are committed to offer products of the highest quality which are
manufactured according to the latest state of the art technology with
stringent quality control and by implementing the Quality Management
System that complying with ISO 9002 / EN46002.
|
|
|
| PRODUCT DESCRIPTIONS |
|
|
| Type |
Non-Strerile
, POWDER
FREE Latex Examination Gloves |
| Material |
Natural
Rubber Latex |
| Colour |
Yellowish |
| Design
& Feature |
Ambidextrous,
straight
fingers, smooth/texture palm surface
& beaded cuff
|
| Size
Available |
Extra
small, Small, Medium, large, Extra
Large |
| Protein
Test |
As
per Modified Lowry Method / ASTM
5712-99 < 50 µg/g |
| Quality
Certification |
MS
ISO 9002, ISO 9002/EN46002 (by TUV),
TGA |
| Quality
Specification |
ASTM
D3578, EN455 (Part 1 & 2) |
|
|
|
| DIMENSIONS |
|
|
|
Glove Size |
Extra
Small |
Small |
Medium |
Large |
Extra
Large |
| Palm
Width (mm) |
ASTM
D3578 |
75
± 10 |
80
± 10 |
95
± 10 |
110
± 10 |
>±
110 |
| EN455
(Part 1 & 2) |
75
± 10 |
80
± 10 |
95
± 10 |
110
± 10 |
>±
110 |
| Length
(mm) |
ASTM
D3578 |
min
230 |
min
230 |
min
230 |
min
230 |
min
230 |
| EN455
(Part 1 & 2) |
min
240 |
min
240 |
min
240 |
min
240 |
min
240 |
|
|
|
| THICKNESS |
|
|
| Location
of Thickness Measurement |
FINGER |
PALM |
CUTT |
| (at
13 ± 2 mm from extreme tip) EN455
Part 1 & 2 ( at 15 mm from the
extreme tip) |
(at
centre of palm) |
(at
15 ± 2 mm from bead) |
| SINGLE
WALL (mm) |
ASTM
D3578 |
min
0.08 |
min
0.08 |
min
0.08 |
| EN455
(Part 1 & 2) |
min
0.08 |
min
0.08 |
min
0.08 |
|
|
|
| PHYSICAL PROPERTIES
In compliance with ASTM D3578 and EN455
(Part 1 & 2) : |
|
|
| Physical
Properties |
Tensile
Strength (Mpa) |
Elongation
at Break (%) |
Modulus
300% (Mpa) |
Force
at Break (N) |
| Before
Aging |
min
21.0 |
min
700 |
min
1.0 |
min
9.0 |
| After
Aging |
min
16.0 |
min
500 |
min
0.9 |
min
6.0 |
|
|
|
|
|
| ©
2007 Asia Pacific Latex Sdn. Bhd.
|
 |
|
|
|
