Another type of powder free gloves which is available from Asia Pacific Latex   Sdn. Bhd. is the polymer coated powder free gloves.

Similar to the chlorinated powder free gloves, the polymer coated powder free gloves is with negligible level of residue powder (i.e., < 2mg/gm) and the protein content on gloves is below 50 µg/g.

The polymer-coated gloves are coated with a special polymer resin on both surfaces of gloves. Unlike chlorinated gloves, the polymer-coated gloves do not have yellowish tint of color and it is odorless.

Range of medical grade polymer coated powder free gloves produced by Asia Pacific Latex Sdn. Bhd. are in accordance to EN, ASTM, FDA and AS/NZS.
We are committed to offer products of the highest quality which are manufactured according to the latest state of the art technology with stringent quality control and by implementing the Quality Management System that complying with ISO 9002 / EN46002.
PRODUCT DESCRIPTIONS
Type Non-Strerile , POLYMER COATED POWDER FREE Latex Examination Gloves
Material Natural Rubber Latex
Colour Whitish
Design & Feature Ambidextrous, straight fingers, smooth/texture palm surface & beaded cuff
Size Available Extra small, Small, Medium, large, Extra Large
Protein Test As per Modified Lowry Method / ASTM 5712-99 < 50 µg/g
Quality Certification MS ISO 9002, ISO 9002/EN46002 (by TUV), TGA
Quality Specification ASTM D3578, EN455 (Part 1 & 2)
DIMENSIONS
                                     Glove Size Extra Small Small Medium Large Extra Large
Palm Width (mm) ASTM D3578 75 ± 10 80 ± 10 95 ± 10 110 ± 10 >± 110
EN455 (Part 1 & 2) 75 ± 10 80 ± 10 95 ± 10 110 ± 10 >± 110
Length (mm) ASTM D3578 min 230 min 230 min 230 min 230 min 230
EN455 (Part 1 & 2) min 240 min 240 min 240 min 240 min 240
THICKNESS
Location of Thickness Measurement FINGER PALM CUTT
(at 13 ± 2 mm from extreme tip) EN455 Part 1 & 2 ( at 15 mm from the extreme  tip) (at centre of palm) (at 15 ± 2 mm from bead)
SINGLE WALL (mm) ASTM D3578 min 0.08 min 0.08 min 0.08
EN455 (Part 1 & 2) min 0.08 min 0.08 min 0.08
PHYSICAL PROPERTIES  In compliance with ASTM D3578 and EN455 (Part 1 & 2) :
Physical Properties Tensile Strength (Mpa) Elongation at Break (%) Modulus 300% (Mpa) Force at Break (N)
Before Aging min 21.0 min 700  min 1.0 min 9.0
After Aging min 16.0  min 500 min 0.9 min 6.0

© 2007 Asia Pacific Latex Sdn. Bhd.